Bits and pieces of the bizarre, strange and just plain odd car and truck items collected from around the web, so you don’t have to. Yer welcome!
This bizarre walking car runs on compressed air instead of an engine
This wacky Romanian prototype relies strictly on compressed air to crawl down the street without any gas or batteries, delivering some truly mind-bending speeds.
I do not think I have ever seen an automotive invention that left me asking so many burning questions right from the start. This bizarre walking car is actually the very first functional prototype of the Rosmar H, which is the incredibly ambitious brainchild of a rogue Romanian inventor named Adrian Roșca.
The strange vehicle has recently surfaced online and secured quite a bit of mainstream media attention, but Roșca has actually been tirelessly developing this wild contraption for over a decade in relative obscurity. It fundamentally abandons traditional automotive propulsion, ignoring combustion engines and EV power entirely to favor something completely unhinged and beautifully strange.
A different kind of crawl mode
So why on earth does it walk instead of rolling? The vehicle walks because conventional cars waste tremendous energy converting linear piston motion into rotational motion for their wheels, only to convert it right back to linear motion on the highway. Roșca sidesteps this friction completely with massive, double-acting pneumatic air cylinders.
By carefully routing highly compressed air to alternating sides of a central piston, the system aggressively pushes the vehicle’s wheels forward and backward in sequence. The tires mechanically brake in one direction and roll completely freely in the opposite direction, forcing the lightweight chassis to violently inchworm its way ahead across the tarmac. It is essentially a giant air-powered pogo stick mounted horizontally on wheels.
Unlike older failed air-powered cars from Peugeot or Tata, this design avoids the dreaded engine expansion cooling trap. Because each massive pneumatic stroke takes time to complete, the expanding air naturally absorbs ambient heat from the surrounding environment. This brilliant thermodynamic loophole provides decent range, using literally nothing but pressurized air and a twelve volt battery for basic valve controls.
Source: Autoblog
Brembo wants you to wear its brake calipers
Brembo is taking its signature caliper design from behind the wheels and putting it on your back with a new clothing collection.

Brembo has spent the last few decades fitting calipers onto some of the world’s best performance cars. Now, apparently, it wants to put them on you. The Italian brake manufacturer has launched Brembo Collections, a new lifestyle project that quite literally lets you wear the hardware.
The first collection is called Brembo Colors of Speed, and it does exactly what you’d expect from a company known for its brake calipers: It puts them on T-shirts. Brembo unveiled the collection ahead of the Formula 1 Italian Grand Prix at Monza.
Colors of Speed features T-shirts in 11 different color variations, with the Brembo brake caliper serving as the centerpiece of the design. The shirts are designed and printed in Italy and will be available for pre-sale through Brembo’s new online store, brembocollections.com.
Not just shirts
The T-shirts aren’t just a one-off, either. Brembo says Colors of Speed is the first step in a larger Brembo Collections project, with more products and collections planned over the coming months.
By the end of 2026, the company expects the platform to feature additional products inspired by Brembo’s design language, technical heritage, and history of innovation. As Brembo Chief Marketing Officer Mauro Piccoli puts it: “Colors of Speed represents the first chapter of a journey that was created to enhance Brembo’s aesthetic and cultural heritage, creating new opportunities for expression and belonging for all those who share our passion.”
Source: Motor1
Toyota is telling mechanics to hit Tundra engines with a hammer
Toyota technicians are employing a highly specialized plastic hammer test to diagnose whether recalled Tundra V6 engines contain fatal manufacturing debris.
If you walk into a dealership and see a mechanic whacking a brand-new truck engine with a hammer, you might assume they have finally lost their minds. However, this is actually the latest official diagnostic procedure from the Japanese automaker. Dealership technicians are currently utilizing a plastic hammer to determine the fate of the V35A twin-turbo V6 engine found in certain 2022-2024 Tundras. While it looks entirely unhinged, the method prevents perfectly healthy trucks from undergoing massive and unnecessary mechanical heart transplants.
This bizarre directive is tied to an ongoing manufacturing nightmare. The automaker previously issued massive recalls because rogue machining debris was left inside the engine block during production, causing catastrophic failure. Unfortunately for truck owners, this recall expansion recently grew to include the 2024 model year. To manage the immense volume of affected trucks, engineers developed this striking new inspection method to efficiently sort the good engines from the doomed ones.

How the impact test actually works
The root of the problem lies deep within the block. A recent engine teardown vividly showcased how leftover manufacturing debris destroys the main bearings, leading to knocking, rough idling, and a complete loss of motive power. Toyota claims engines produced later received an improved No. 1 main bearing designed to resist this exact debris, but thousands of trucks remain in the danger zone.
Enter campaign 25TA14, officially known as the V35A Crank Bearing Inspection. According to a report from Pickup Truck + SUV Talk, the process is surprisingly rigorous. Technicians must first change the oil, reach specific operating temperatures, remove accessory belts, and align the crankshaft perfectly. They then mount a sensitive accelerometer directly to the crankshaft bolt. Finally, the mechanic strikes the crankshaft pulley at the 3 o’clock position with a specific plastic hammer.
This impact sends vibrations through the metal, which are captured by the accelerometer and fed into advanced diagnostic software. The computer analyzes the resonance, judges the quality of the strike, and automatically uploads the data to the cloud to return a simple pass or fail grade. Because of this software, the targeted replacement strategy guarantees mechanics are replacing only the specific engine assemblies that genuinely fail the acoustic check.
Method behind the madness
Calling it a hammer test makes the entire ordeal sound laughably primitive, but it is rooted in solid science. This technique is formally known as experimental modal analysis. Engineers have used impact sensors for decades to measure how structures respond to a controlled force. By analyzing the natural frequencies and damping within the crankshaft, the software can effectively detect compromised bearings without tearing the entire block apart.
While the engineering principle is an established industry practice, seeing it deployed on the service floor is undeniably unusual. It is a brilliant way to save millions of dollars in warranty claims while quickly diagnosing customer vehicles. Still, peering through the service bay window to watch a mechanic hitting your expensive rig with a hammer is definitely going to spark some highly entertaining conversations at the dealership counter. Until then, try not to panic if you hear rhythmic thumping coming from the garage during your next scheduled maintenance visit.
Source: Autoblog
“We could have gone faster,” says former fighter pilot after setting new world land speed record
A former senior officer in the RAF has set a new world land speed record of 653.909 km/h (406.320 mph) using a hydrogen-powered car at Bonneville Salt Flats in Utah.
Wing Cdr (Ret’d) Andy Green, who described the attempt as an “extraordinary achievement”, drove JCB’s 32 ft Hydromax car, which is powered by two of the company’s hydrogen combustion engines.
The record run was overseen by the International Automobile Federation (FIA) and is subject to ratification by the governing body’s Land Speed Records Commission.
“During the two record runs today, I actually had to lift off the accelerator and actually slow down through the measured mile because we’d hit our limiting speed,” he said.
The vehicle used for the record produced a combined 1,600 brake horsepower. The car’s speed is five to six times the legal limit in most countries, which the former wing commander described as creating a weird effect.
The 63-year-old did a run in each direction over a mile within an hour, with the average speed establishing the record time. His first came in at 644.740 km/h (400.623 mph), and his second at 663.266 km/h (412.135 mph).
Describing the process of the record attempt, he said: “I took it up to 674.315 km/h (419 mph) in the middle of the measured mile, lifted off the pedal, coast down to the end of it, and then shoot out at 611.55 km/h (380 mph), the car stopped exactly where it should have done at the end of the track.
“Had we had more goes, we could have gone faster and faster.”
He already holds the outright world land speed record after driving ThrustSSC to 1,227.985 km/h (763.035 mph) in 1997, becoming the first and still only person to break the sound barrier on land, according to the FIA.
The former fighter pilot, who received an OBE in 1997, flew Phantoms, Tornados, and Harrier aircraft during his service with the RAF. He deployed to Iraq, Afghanistan, Bosnia, and the Falklands and also served as Officer Commanding Operations at RAF Wittering.
Source: Forces News

